#Kwikset master key set how to#
#Kwikset master key set code#

There could also be a misalignment issue or trouble with your lock cylinder. In cases like these, the lock may need to be removed or replaced. If you can turn the key but the lock isn't turning it is probably because there is an issue with the lock's mechanism system. The graphite will act as a lubricant to help unjam lock tumblers that may have become clogged with debris over time. Coat your key in graphite and insert it into the keyhole. If you do want to attempt to fix this issue yourself, you can try using powdered graphite or a graphite spray.

In most cases, it would be better to call a locksmith to resolve this particular issue. Make sure you do your research before attempting to fix this key and lock issue on your own, as mistakes could cause damage to the lock or your door. Pins might be corroded or the pin chamber might be worn out. When the key will not go into the lock all the way, it may be because there is an obstruction. Make sure you are positioning the key correctly within the lock before you decide to go ahead and send your key back. Unfortunately, in cases like these, you may need to get a new key cut so you can get into your home. If you can insert the key, but it will not turn, it is probably because the key was not cut properly. One of the most common reasons locks won't open is when keys are freshly cut. However, you may be able to save yourself some money by purchasing the hardware you will need to make the necessary repairs. If you are dealing with any of the following key or lock issues that are preventing you from being able to unlock your doors, you might need a locksmith. Sometimes do-it-yourself options just don't cut it. You’ll no longer have to carry your key around with you and it’s one less thing you don’t have to worry about losing.

#Kwikset master key set code#

Instead, you may be able to enter a pin code to unlock the door. You will no longer need a key to access your home at all.

You might be able to avoid dealing with key locks that won't turn if you purchase keyless entry systems. Before trying to turn the key again, be sure to use some lubricant on the key and in the locking mechanism. To fix a blunt key tip, you can use a bastard file to remove excess metal preventing the key from turning.

When you use your key as a box cutter or for any other reason other than opening a lock, it can cause damage to the tip of the key, just like it can bend it. Keys are cut in a way that only allows them to fit into their specific lock.

#Kwikset master key set how to#

The video below shows you how to straighten a key with a vice and wooden sticks. You can place a piece of wood between the keys in the hammer to protect it. If you have a vice bench, this might be significantly easier. You do not want to flatten the key, so be careful to remove the bend in the key only. You can do this by using a hammer and hammering the key on a smooth, hard surface. If this happens, you need to try to straighten your key as much as possible. If your key is bent, it could jam inside the lock when you attempt to get into your home. If you use your key to cut things, as a box cutter, or as a can opener, for example, you could be causing your key to bend. Alternatively, you might also try using a blow dryer to blow hot air directly into the locking mechanism to thaw out your door locks. Once the key is warm and dry, insert a key into the lock mechanism and slowly turn it. Simply warm up your key by placing it in a small container of hot water. The video below demonstrates how to apply dry graphite lubricant to fix a stuck door lock.įrozen locks may not be an issue in the summer months, but in the wintertime, when your door locks get frozen shut, it can be impossible to get your doors unlocked. It's easier and cleaner to use dry lubricant when you can. While WD-40 and other lubricant sprays are often readily available, they do get messy. Once it has been sprayed, insert the key so the lubricant will work into the locking mechanism. Simply grab a can of WD-40, silicon-based lubricant, graphite spray, or a dry lubricant and spray it into the keyway. When this happens, pins can get stuck, which prevents the plug from being able to turn correctly. One of the top issues with locks and keys occurs when dust and dirt begin collecting inside of a lock cylinder. Here are several DIY solutions to your key lock problems. Fortunately, there are several do-it-yourself options that help you get your doors unlocked quickly without having to deal with the hassle of contacting a locksmith. Having a key that won't turn in the lock can be more than a bit of an inconvenience. Shop Keyless Door LocksĭIY Troubleshooting Steps To Unlock Your Doors Key won't turn in lock? Now might also be a good time to consider a keyless entryset to simplify your life and remove the complications that come with keys altogether.